Vance, J. M. and R. D. Jenison, "Choosing a
Graphics
Software Package for Educational Software Development: A Comparison of PHIGS
and HOOPS," The Engineering Design Graphics Journal, Autumn 1990, Vol. 50,
Number 3, pp. 3-8.
Shahan, J. C. and R. D. Jenison, "Visualization in
Graphics: Time for a Change?", Engineering Design Graphics Journal, Vol. 53,
Number 3, 1989.
Lynch, Alan and R. D. Jenison, "Three-Dimensional
Representation of a Cylinder on a Graphics Display Device," Engineering Design
Graphics Journal, Vol. 51, Number 3, 1987.
Eide, A. R. and R. D. Jenison, "Freshman Engineering:
An Administrative Entity," Engineering Education, March 1984.
Jenison, R. D. and R. J. Bernhard, "CAD for Freshmen -
The First Step Toward Integrated Engineering Design Education," Computers in
Mechanical Engineering - Special Education Issue. 1984.
Jenison, R. D. and A. R. Eide, "Freshman Engineering:
A Coherent Beginning Incorporating the Computer," Academic Computing, Vol. 1,
Number 1, 1984.
Jenison, R. D. and R. J. Bernhard, "The First Step
Toward CAD - A Freshman Design Component," Engineering Design Graphics Journal,
Vol. 47, Number 1, 1983.
Jenison, R. D. and J. M. Vogel, "Engineering Graphics
Instruction and Computer Graphics - A Necessary Merger," Engineering Design
Graphics Journal, Vol. 46, Number 1, 1982.
Jenison, R. D. and A. M. Russell, "Creating a Winning
Freshman Design," Engi neering Design Graphics Journal, Vol 43, Number 3, 1979.
Eide, A. R., R. D. Jenison, L. L. Northup,
"Engineering Graphics Fundamentals," 2nd edition, 1995.
Eide, A. R., R. D. Jenison, L. H. Mashaw,
L. L. Northup, "Engineering Graphics Problem Book II," McGraw-Hill. 1987.
Eide, A. R., R. D. Jenison, L. H. Mashaw, L. L.
Northup, "Engineering Fundamen tals and Problem Solving," 2nd Ed., November.
1986. (Third edition in progress).
Eide, A. R., R. D. Jenison, L. H. Mashaw,
L. L. Northup, "Problems Books to Accompany Engineering Graphics Fundamentals,
" McGraw-Hill, New York. 1985.
Eide, A. R., R. D. Jenison, L. H. Mashaw,
L. L. Northup, C. G. Sanders, "Engi neering Graphics Fundamentals," McGraw-Hill,
New York. 1985.
Eide, A. R., R. D. Jenison, L. H. Mashaw,
L. L. Northup, "Engineering Fundamen tals and Problem Solving," McGraw-Hill,
New York. 1979.
Jenison, Roland D., "New Directions for Introductory
Graphics in Engineering Education", Proceedings of the 7th International
Conference on Engineering Computer Graphics and Descriptive Geometry, Cracow,
Poland, July 1996. Keynote Article.
Auslander, David M. and Jenison, Roland D.,
"Institutionalization of Mechatronics Curricular Material," Proceedings of the
Frontiers in Education Conference, Atlanta, Georgia, November 1995.
Mickelson, Steven K., Jenison, Roland D., and Swanson,
Noah, "Teaching Engi neering Design through Product Dissection," Proceedings
of the 1995 American Society for Engineering Education Annual Conference,
Anaheim, California, June 1995.
Jenison, R. D. "Stimulating Interest and Promoting
Learning in Engineering Graphics," Proceedings of the 6th International
Conference on Engineering Computer Graphics and Descriptive Geometry, Tokyo,
Japan, August 1994 (Invited paper)
Jenison, R. D. "Graphics--Just in Time for Design,"
Proceedings of the Midyear Meeting of the Engineering Design Graphics Division
of the American Society for Engineering Education, Athens, Ohio, November 1993.
Jenison, R. "Designing a Graphics Program for
Design". Proceedings of the Fifth International Conference on Engineering
Computer Graphics and Descriptive Geometry, Melbourne, Australia, August 1992.
Jenison, R. D., "Achieving the Objectives of a
Graphics Design Course with a Solids Modeling Approach", Proceedings of the
NSF Symposium on Moderniza tion of the Engineering Design Graphics Curriculum,
Austin, Texas, August 1990. (Invited paper).
Vance, J. M. and R. D. Jenison, "Choosing a Graphics
Software Package for Educational Software Development: A Comparison of PHIGS
and HOOPS," Proceedings of the 1990 Annual Meeting of the American Society for
Engineering Education, Toronto, Ontario, Canada, June 1990.
Shahan, James C. and Roland D. Jenison, "Visualization
in Graphics: Time for a Change?", Proceedings of the 1988-89 Midyear Meeting
of the Engineering Design Graphics Division of the American Society for
Engineering Education, New Harmony, Indiana, November 1988.
Jenison, Roland D., "Implementation of Computer
Modeling and Analysis in Engineering Design Graphics courses," Proceedings of
the Third International Conference on Engineering Graphics and Descriptive
Geometry, Vienna, Austria, July 1988.
Shahan, J. C. and R. D. Jenison, "Old Fashioned
Graphics in a New Environment," Proceedings of 1988 ASEE Annual Conference of
the American Society for Engineering Education, Portland, Oregon, June 1988.
Jenison, Roland D., "Early CAD Experience Enhances
Engineering Design Educa tion," Proceedings of the 1988 Annual Conference of
the American Society for Engineering Education, Portland, Oregon, June 1988.
Lund, Y. I. and R. D. Jenison, "An Introduction to
Geometric Modeling and Analysis using Three-Dimensional Primitives,"
Proceedings of the Midyear Meet ings of the Engineering Design Graphics
Division of ASEE, Louisville, KY, November 1987.
Lund, Y. I. and R. D. Jenison, "MODEL: An Interactive
Program for Introducing Engineering Students to Computer-Based Geometric
Modeling and Analysis," Proceedings of the North Midwest Section of ASEE, Ames,
IA, October 1987.
Eide, A. R. and R. D. Jenison, "Freshman Engineering
Design at Iowa State University," Proceedings of the 1987 Annual Conference of
ASEE, Reno, NV, June 1987.
Eide, A. R. and R. D. Jenison, "Computing in
Lower-Division Engineering," Invited article for EDU Magazine, Issue Number 47,
Spring 1988, pages 28-30.
Jenison, R. D. and A. R. Eide, "Integration of
Computers into First Year Design," ASEE, Cincinnati, Ohio, June 1986.
Jenison, R. D., "A New Look in Introductory Design
Education," ASEE Annual Meeting, Atlanta, June 1985.
Jenison, R. D., "Computer Modeling in Engineering
Graphics," ASEE Midyear Meeting, Kansas City, November 25-28, 1984.
Jenison, R. D., "Engineering Graphics/Computer
Graphics - An Iowa State Interim Report," ASEE Midyear Meeting,
Pittsburgh, January 1984.
Jenison, R. D. and R. D. Bernhard, "The First Step
Toward CAD - A Freshman Design Component," Midyear Meeting of the Engineering
Design Graphics Division of the American Society of Engineering Education,
Pomona, CA, January 4-7, 1983.
Jenison, R. D. and R. D. Bernhard, "The Enhancement of
Engineering Graphics Instruction with Computer Graphics," North Midwest
Section Annual Meeting, University of Iowa, October 10-12, 1982.
Jenison, R. D. and J. M. Vogel, "Engineering Graphics
Instruction and Computer Graphics - A Necessary Merger," Midyear Meeting of the
Engineering Graphics Division of the American Society of Engineering Education,
Louisville, January 3- 5, 1982.
Jenison, R. D., "Engineering Graphics Faculty
Interfacing with Computer Graph ics," Annual Meeting of American Society for
Engineering Education, Amherst, June 1980.
Jenison, R. D. and A. M. Russell, "Creating a Winning
Freshman Design," Annual Meeting of American Society for Engineering Education,
Baton Rouge, June 25- 28, 1979.
Northup, L. L. and R. D. Jenison, "Introducing
Freshman Engineers to Program mable Calculators," invited paper at the
Illinois-Indiana Section Meeting, Peoria, IL, March 29-30, 1979.
Jenison, R. D. and L. L. Northup, "Use of Programmable
Calculators in Freshman Engineering," Annual Meeting of American Society for
Engineering Education at Vancouver, British Columbia, June 19-22, 1978.
Northup, L. L. and R. D. Jenison "Counseling
Beginning Engineers - The ISU Approach," Annual Meeting of American Society for
Engineering Education at North Dakota University, Grand Forks, N. D.,
June 27-30, 1977.
Jenison, R. D. and L. L. Northup, "Engineering
Freshman," North Midwest Section of American Society for Engineering Education
at ISU, October 24-26, 1976.
Jenison, R. D. and D. B. Benepe, "Analysis of Buffet
Data Obtained with Conven tional Wind-Tunnel Force Models." General Dynamics
Research Report ERR-FW- 754. 1968.
Jenison, Roland D., Masters Thesis, "Foreplane-Wing
Interference Effects in Supersonic Flow." 1965.
Return to the main page.