Annette Hacker, director,
Office: (515) 294-4777
Iowa State University researchers recently field-tested a system they're developing to harvest corn stover (the stalks, cobs and leaves) and grain with one pass through a field.
Stuart Birrell, Agricultural and Biosystems Engineering, (515) 294-2874, email@example.com
Mike Krapfl, News Service, (515) 294-4917, firstname.lastname@example.org
Iowa State researchers developing machinery to harvest corn stalks and leaves
AMES, Iowa -- A John Deere 9750 STS combine slowly made its way through an Iowa State University research field, all the while dumping a crop of corn kernels into the combine's hopper and blowing a crop of stalks, cobs and leaves into a trailing wagon.
That dual-stream, single-pass harvesting system was developed by Stuart Birrell, an Iowa State associate professor of agricultural and biosystems engineering, and graduate students Mark Dilts and Ben Schlesser. They're working to design, build and test machinery that will harvest corn stover -- the stalks, cobs and leaves -- when farmers bring in their grain. The stover could be the source of plant fiber that feeds the next generation of ethanol plants.
The researchers ran their latest version of a stover harvester through about 50 acres of corn near Ames this fall. Birrell recently showed some video of the tests on his office computer and explained how the system works.
The researchers are developing stover attachments that can be used on standard combines. The result would be an additional cost to farmers of about $10,000 to $15,000 instead of the six figures it would take for a separate combine to harvest stover. The attachments would also allow farmers to harvest grain and stover with one pass through a field.
The system the researchers have come up with includes a modified row crop header and corn reel attached to the front of the combine and a chopper and blower attached to the back.
The header and reel feed leaves and stalks into the combine so the biomass can be harvested before it touches the ground and is contaminated with soil. The chopper cuts stover into 2-inch pieces. And the blower throws the chopped stover into a wagon.
Although tests with the prototype machine have been successful, Birrell said there is more development work to do:
Birrell's stover harvesting research has been supported by a three-year, $180,000 grant from the U.S. Department of Agriculture and the U.S. Department of Energy and a two-year, $50,000 grant from Deere & Company of Moline, Ill.
Birrell said development of a stover harvesting system has been constrained by a lack of research funding.
"Significant resources have been dedicated to the process of converting cellulose into ethanol," he said. "But very little has gone into answering how do you get a supply of stover from the field to the biorefinery. This will be critical to the success of the bioeconomy."
Iowa State University researchers are developing front and rear attachments that allow a conventional combine to harvest corn stover (the stalks, cobs and leaves) as well as grain. The stover could be the source of plant fiber that feeds the next generation of ethanol plants.
"Significant resources have been dedicated to the process of converting cellulose into ethanol. But very little has gone into answering how do you get a supply of stover from the field to the biorefinery. This will be critical to the success of the bioeconomy."
Stuart Birrell, an Iowa State associate professor of agricultural and biosystems engineering