Publication
- "Forecasting Capital Funding Necessary to Meet Hospital Equipment
Replacement Requirements" Computers and Industrial Engineering, Vol.
14, No. 3, 1988. Douglas D. Gemmill and Susan Jensen.
- "Approximate Solutions for the Cutting Stock 'Portfolio' Problem,"
European Journal of Operational Research, Vol. 44, No. 2, 1990.
Douglas D. Gemmill and Jerry L. Sanders.
- "A Comparison of Solution Methods for the Assortment Problem,"
International Journal of Production Research, Vol. 29, No. 12, 1991.
Douglas D. Gemmill and Jerry L. Sanders.
- "Solution to the Assortment Problem via the Genetic Algorithm,"
International Journal of Mathematical and Computer Modelling, Vol 16,
No. 1, 1992. Douglas D. Gemmill.
- Stochastic Optimization of the Cost of Automatic Assembly Systems.
European Journal of Operational Research, Vol. 77, No. 2, Sep 1994.
Elly Tandiono and Douglas Gemmill.
- "A Genetic Algorithm Approach to Optimization of Asynchronous
Automatic Assembly Systems," International Journal of Flexible
Manufacturing Systems, Vol. 7, No. 1, Jan. 1995, Mark Wellman and
Douglas Gemmill.
- "Scheduling a Two-Machine Flowshop with Travel Times to Minimize
Maximum Lateness," International Journal of Production Research. Vol.
35, No. 1, 1997, John Stevens and Douglas Gemmill.
- "Determination of Fabrication Orientations for Rapid Prototyping
with Stereolithography Apparatus," accepted for publication in Journal
of CAD. Po-Ting Lan, Shuo-Yan Chou, Lin- Lin Chen, and Dougas D. Gemmill.
- "Using a Simulated Annealing Algorithm to Schedule Activities of
Resource-Constrained Projects," accepted for publication in Project
Management Journal, Ying-Wei Tsai and Douglas D. Gemmill.
- "Using Tabu Search to Schedule Activities of Stochastic
Resource-Constrained Projects," accepted for publication in European
Journal of Operational Research, Ying-Wei Tsai and Douglas D. Gemmill.
- "A Fast Heuristic for Large-Scale Capacitated Lot Sizing Problems,
With or Without Setup Times," accepted for publication in Computers and
Industrial Engineering, Robert J. McCoy and Douglas D. Gemmill.
- "Analysis of an Effective Sensing Location for Detecting Tool
Breakage in End Milling Operations," Worknig Paper #97-103, accepted for
publication in Journal of Industrial Technology, Wei-Liang Chen, Joseph
Chen, and Douglas D. Gemmill.
- "An Interdisciplinary Approach to Design Education," Proceedings of
the 1990 ASEE/North Midwest Section Annual Meeting, Michigan
Technological University. D.R. Flugrad, D.D. Gemmill, T.J. McDaniel, and
M.S. Devgun.
- "Industrial Partnership in Manufacturing Systems Design," Proceedings
of the 1991 ASEE/North Midwest Section Annual Meeting, University of
Wisconsin - Platteville. Douglas Gemmill, John Jackman, and Richard Linn.
- "Development of an Interdisciplinary Design Course for the Senior
Year," Proceedings of the 1991 ASEE/North Midwest Section Annual
Meeting, University of Wisconsin - Platteville. D.R. Flugrad, D.D.
Gemmill, and T.J. McDaniel.
- "What Makes CQI/TQM a Success: A Statistical Analysis," Proceedings
of the Quest for Quality and Productivity in Health Services Conference,
Institute of Industrial Engineers, Norcross, GA. Parish, M. and
Gemmill, D.D (Sep 1993).
- "An Extended Dixon and Silver Heuristic for Solving Dynamic,
Capacitated Lot-Sizing Problems," The Proceedings of the Third
Industrial Engineering Research Conference (May 1994), Atlanta, Georgia,
Robert J. McCoy and Douglas D. Gemmill.
- "A Wagner-Whitin Based Heuristic for Solving Dynamic, Capacitated,
Lot Sizing Problems," accepted for The Proceedings of the Fourth
Industrial Engineering Research Conference (May 1995), Nashville,
Tennessee, Robert J. McCoy and Douglas D. Gemmill. (This was not
included since Bob did not show up for the conference!!!!!)
- "The Scheduling of Drivers in a Capacitated Vehicle System for a
Two-Way Commuter Club,"Presented at 1992 ORSA/TIMS Joint Annual Meeting,
Jeff LaMar and Douglas D. Gemmill (Nov 1992).
- "Determination of Fabrication Orientations for Rapid Prototyping
with Stereolithography Apparatus," Proceedings of the 3rd International
Conference on Automation Technology (Automation '94), Taiwan, July 1994,
Po-Ting Lan, Shuo-Yan Chou, Lin-Lin Chen, and Dougas D. Gemmill.
- "A Sensitive Sensor Mounting Method for Tool Breakage Detection in
Milling Operations," Proceedings of the Sixth Industrial Engineering
Research Conference, May 1997, Miami Beach, Florida. Wei-Liang Chen,
Joseph C. Chen, and Douglas D. Gemmill. (Presented at the conference by
Wei-Liang Chen)